3M™ Preferred Converter
Die Cutting Services | Foam, Rubber, Adhesive Tapes, VHB & Films
Rotary and flat-bed die cutting to your drawing. Kiss-cut, sheeted or waste-removed parts, from prototype runs to continuous production.
About Us
Why work with RGH?
RGH operates under rigorous management systems that guarantee consistency and reliability in every product.
-
3M™ Preferred Converter
One of a select group of UK converters approved by 3M; with direct access to 3M technical support and specialist grades most suppliers can't source.
-
40 Years' Converting
Four decades solving bonding, sealing and insulation challenges for UK manufacturers; we've almost certainly cut your material before.
-
UK & Poland Facilities
Converted, quality-checked and dispatched from one of our manufacturing plants closest to you. Shorter lead times, no middlemen.
-
ISO & IATF Certified
Every part produced under our certified quality management system, with full traceability from master roll to finished part.
What We Cut
Materials Available for Die Cutting
Rubber
Double Sided Adhesive Tapes
Double Sided Foam Tapes
3M™ Solutions
One drawing is all it takes to get started
From Master Roll to Finished Part
Every job follows the same path: you send us a drawing or sample, our engineers pick the right material and tooling, and you get parts cut to spec — kiss-cut, sheeted or waste-removed, ready for your line. Raw material in, application-ready components out.
Engineer-Led From Day One
From your first enquiry, you're talking to the people who'll actually make your parts; not a call centre working through a script. That means straight answers on materials, tolerances and cost, and an honest "it depends" when it genuinely does. If die-cutting isn't the right process for your part, we'll tell you that too.
-
1.
Send Your Drawing
A DXF, DWG or dimensioned PDF is ideal; but a sketch, photo or sample part in the post works too.
-
2.
Engineer Review
We check material, tolerances, tooling and whether an existing die in our library can save you setup cost.
-
3.
Rapid Quoting
A clear price covering prototype and production quantities, with material options if there's a better fit.
-
4.
Sample & Approve
We cut samples for you to test in your real application before you commit to a production run.
-
5.
Production & Repeat Supply
Parts delivered kiss-cut, sheeted or waste-removed and ready for your line, with repeat orders held to the same spec.
We Solve
Industries We Cut For
Benefits
Why Choose Die-Cutting from RGH?
From low- to medium-volume production runs, flat bed die-cutting provides a reliable, cost-effective solution for custom parts. Here’s why manufacturers choose RGH:
-
Precision Kiss-Cutting
Cut adhesive parts while leaving the liner intact; ideal for roll presentation and fast application.
-
Custom Shapes & Sizes
Supports complex geometries for gaskets, strips, and pads up to 600mm square.
-
Flexible Presentation Options
Parts can be delivered sheeted, stacked, kiss-cut, waste-removed, or with finger-lift tabs.
-
No-Waste Gapping Capabilities
Create spacing between components without the need to strip waste; reducing cost and material handling.
-
Optimised for Manual or Automated Use
Products can be peeled and applied by hand or through automated systems for production-line efficiency.
-
Material Compatibility
Works across foams, rubbers, adhesive tapes, and multi-layered constructions.
Need Custom-Shaped Die-Cut Components?
Whether you’re refining your prototype or scaling up production, we’ll help you specify the right material and format for your process.