Preferowany Konwerter 3M™
Die Cutting Services | Foam, Rubber, Adhesive Tapes, VHB & Films
Rotary and flat-bed die cutting to your drawing. Kiss-cut, sheeted or waste-removed parts, from prototype runs to continuous production.
O nas
Why work with RGH?
RGH działa w oparciu o rygorystyczne systemy zarządzania, które gwarantują spójność i niezawodność każdego produktu.
-
Preferowany Konwerter 3M™
One of a select group of UK converters approved by 3M; with direct access to 3M technical support and specialist grades most suppliers can't source.
-
40 Years' Converting
Four decades solving bonding, sealing and insulation challenges for UK manufacturers; we've almost certainly cut your material before.
-
UK & Poland Facilities
Converted, quality-checked and dispatched from one of our manufacturing plants closest to you. Shorter lead times, no middlemen.
-
ISO & IATF Certified
Every part produced under our certified quality management system, with full traceability from master roll to finished part.
What We Cut
Materials Available for Die Cutting
Pianka i gąbka
Guma
Dwustronne taśmy klejące
Dwustronne taśmy piankowe
Rozwiązania 3M™
One drawing is all it takes to get started
From Master Roll to Finished Part
Every job follows the same path: you send us a drawing or sample, our engineers pick the right material and tooling, and you get parts cut to spec — kiss-cut, sheeted or waste-removed, ready for your line. Raw material in, application-ready components out.
Engineer-Led From Day One
From your first enquiry, you're talking to the people who'll actually make your parts; not a call centre working through a script. That means straight answers on materials, tolerances and cost, and an honest "it depends" when it genuinely does. If die-cutting isn't the right process for your part, we'll tell you that too.
-
1.
Send Your Drawing
A DXF, DWG or dimensioned PDF is ideal; but a sketch, photo or sample part in the post works too.
-
2.
Engineer Review
We check material, tolerances, tooling and whether an existing die in our library can save you setup cost.
-
3.
Rapid Quoting
A clear price covering prototype and production quantities, with material options if there's a better fit.
-
4.
Sample & Approve
We cut samples for you to test in your real application before you commit to a production run.
-
5.
Production & Repeat Supply
Parts delivered kiss-cut, sheeted or waste-removed and ready for your line, with repeat orders held to the same spec.
Rozwiązujemy
Industries We Cut For
Korzyści
Why Choose Die-Cutting z RGH?
From low- to medium-volume production runs, flat bed die-cutting provides a reliable, cost-effective solution for custom parts. Here’s why manufacturers choose RGH:
-
Precision Kiss-Cutting
Cut adhesive parts while leaving the liner intact; ideal for roll presentation and fast application.
-
Custom Shapes & Sizes
Obsługuje complex geometries for gaskets, strips, and pads up to 600mm square.
-
Flexible Presentation Options
Parts can be delivered sheeted, stacked, kiss-cut, waste-removed, or with finger-lift tabs.
-
No-Waste Gapping Capabilities
Create spacing between components without the need to strip waste; reducing cost and material handling.
-
Optimised for Manual or Automated Use
Products can be peeled and applied by hand or through automated systems for production-line efficiency.
-
Material Compatibility
Works across foams, rubbers, adhesive tapes, and multi-layered constructions.
Need Custom-Shaped Die-Cut Components?
Whether you’re refining your prototype or scaling up production, we’ll help you specify the right material and format for your process.